MH150

Advantages:

– Heavy strong construction
– The perfect double notch joint of the tool A482 (A483) guarantees 75% of the tensile strength of the steel strap (similar
to 80% reached with 3 punches but a lot higher then 55% with 2 punches necessary for small packs/coils)
– All current steel straps can be used with elongation from 600-1100N/mm2
/ 87000-160000psi or galvanised
– Packs can be dirty or with grease (no problems like with welding joints)
– Using seals available in the market (competitors ask for their own seal)
– The strap is tensioned through a profiled tension wheel, driven by motor-gear frequency controlled,
adjustment by pneumatic clutch with manometer
– No tension released (not necessary an opposite joint or the Microlock joint)
– Min. parcel width is 80mm (90mm for 32mm) with hard package, the min coil diam. is approx. 200mm.
– Small hexagonal tubes with 85mm side
– Circumferential strap for coils with ext. diameter aprox. 200mm
– Strap feed and retract speed is frequency controlled and therefore adjustable
– Low wearing material; wearing parts in contact with the seal are made for A482 (A483) so available in stock
– Mechanical switch/sensor to detect the parcel